PHILADELPHIA – With the weather turning chilly, it’s time for the list of fall chores. And right up there along with installing the storm windows and getting the heating system checked, should be testing the radon levels inside your home.
Radon comes from the natural breakdown of uranium in soil, rock and water. It is harmless when dispersed into outdoor air. But when it becomes trapped inside buildings, it can be harmful at elevated levels. It typically moves up through the ground to the air in your home through cracks and other holes in the foundation. This means any home can have a radon problem, whether it is new or old, well-sealed or drafty, with or without basements.
Conducting a radon test is the only way to know if you and your family are at risk of radon because you can’t see it, smell it, or even taste it. Fall and winter are the best times to conduct a test because doors and windows are sealed tight against the cold, which ensures a more accurate radon reading.
Radon test kits are easy to use and inexpensive. They are available at any hardware store or home center.
For best results, EPA recommends that the radon test be conducted in the lowest livable level of the home, such as the basement, during the colder months of the year. Tests can also be taken during other times of the year if windows and doors have been closed for 12 hours prior to testing.
EPA recommends that houses with radon levels of four picocuries or more of radon should be vented to prevent accumulation of the gas indoors. A variety of methods can be used to reduce radon in homes. Sealing cracks and other openings in the foundation is a basic part of most approaches to radon reduction. EPA does not recommend the use of sealing alone to limit radon entry. Sealing alone has not been shown to lower radon levels significantly or consistently.
In most cases, a system with a vent pipe and fan is used to reduce radon. These "sub-slab depressurization" systems do not require major changes to your home. They prevent radon gas from entering the home from below the concrete floor and from outside the foundation.
The cost of making repairs depends on how your home was built and the extent of the radon problems. Most homes can be fixed for about the same cost as other common home repairs like painting or having a new hot water heater installed. The average price for a contractor ranges from $500 and $2,500.
To learn more about how to receive a discounted radon home test kit or for more information about radon, and how to contact your state radon office, go to www.epa.gov/radon, or call (800) SOS-Radon.
The Healthy House Institute (HHI), a for-profit educational LLC, provides the information on HealthyHouseInstitute.com as a free service to the public. The intent is to disseminate accurate, verified and science-based information on creating healthy home environments.
While an effort is made to ensure the quality of the content and credibility of sources listed on this site, HHI provides no warranty - expressed or implied - and assumes no legal liability for the accuracy, completeness, or usefulness of any information, product or process disclosed on or in conjunction with the site. The views and opinions of the authors or originators expressed herein do not necessarily state or reflect those of HHI: its principals, executives, Board members, advisors or affiliates.
